Intifix
తె

What does a TV repair cost in Nellore? The rate card explained

TV repair in Nellore by fault: diagnosis and labour figures, how parts are priced at MRP, what pushes a bill up or down, and how to book the right job.

4 min read · Updated 19 August 2026

A TV repair in Nellore through us costs ₹350 for the visit, diagnosis and standard labour on most faults, and ₹499 for a backlight repair. Parts, when needed, are on top at MRP, shown to you before they are fitted. That is the whole structure. The rest of this guide explains what sits behind each figure so the final bill holds no surprises.

The rate card by fault

Fault Diagnosis + labour What the visit covers
No display ₹350 Panel, T-Con and HDMI board diagnosis
No sound ₹350 Speaker, audio IC and HDMI board fix
Backlight fault ₹499 LED strip or driver board replacement
Smart / Wi-Fi issue ₹350 Network module, firmware and software fix
Remote issues ₹350 IR sensor and main board repair

The general television repair entry on the rate card is ₹350 — diagnosis plus labour — and that applies if your fault does not fit one of the five neatly: a set that will not switch on, a blinking standby light, a TV that shuts off by itself.

What "standard labour" covers

The work a technician can do on the spot or on the bench with the tools carried: replacing a power supply board or its failed capacitors, swapping a T-Con or main board, reflowing or replacing an HDMI board, fitting a new IR sensor, re-seating a ribbon cable, cleaning corroded connectors, updating firmware, clearing a smart TV's storage and reconfiguring the network. Most TV faults are one of these.

Backlight work is the exception, priced at ₹499 because the panel has to come out of the frame to reach the strips, and go back in without damage.

How parts are priced

Parts are charged at MRP, and the technician shows you the part and its price before it goes in. Without quoting figures we do not control:

  • Cheap parts that fix a lot of TVs: a fuse, a set of capacitors on the power board, an IR sensor, an HDMI cable, a remote.
  • Middle parts: power supply board, T-Con board, LED strip set, Wi-Fi module, speakers.
  • Expensive parts: the main board on a large smart TV, and the panel. The panel is the one that turns the visit into a repair-or-replace conversation, and we have a separate guide for that.

If a technician cannot show you the old part that came out, ask why.

What makes the bill lower

  • You have done the safe checks — socket, real power cycle, source, cables — and say so. Less diagnosis time.
  • The fault was a setting, a cable or a frozen board: the rate card figure is the bill.
  • You booked the right fault, so the technician arrived with the likely board for your brand and size.
  • You can tell the technician the torch-test result for a black screen with sound.

What makes the bill higher

  • The TV was run for weeks with a flickering backlight until it failed completely, taking the driver with it.
  • A surge has damaged more than one board — power supply and main board together is common after lightning on the Nellore coast.
  • Humidity corrosion on the coastal side has got into the HDMI board as well as the connectors.
  • The set is a large, recent smart TV whose main board is a costly part at MRP.

What is not charged

  • No advance payment. You pay when the work is done.
  • No charge for declining a quote. If the diagnosis is "panel" and you choose a new TV, the visit fee stands and nothing more.
  • The repair carries a written 30-day warranty on the labour and the specific fault fixed. If it returns inside that, it is fixed free, parts included.

A few worked examples

A five-year-old 43-inch LED has sound but a black screen; the owner saw a ghost image with a torch. Backlight strips failed. Bill: ₹499 plus the strip set at MRP, shown first. Brightness set to a sensible level before the technician leaves.

A 32-inch set is dead after an evening power cut; no standby light. Power board fuse and two swollen capacitors. Bill: ₹350 plus the capacitors at MRP. A surge protector is recommended.

A smart TV keeps dropping Wi-Fi and the apps crash. Storage nearly full, firmware two versions behind, router on a crowded channel. Cleared, updated, reconnected. Bill: ₹350, no part.

A 55-inch set has a thin vertical line from cold. Panel driver strip. Written quote for the panel given; family compares with a new set and chooses new. Bill: ₹350 for the visit and a clear answer.

Booking the right job

Pick the symptom closest to yours from the five; if it does not fit, book the general television repair. Mention the brand, the screen size and the rough age, and whether it is a smart or Android TV. Those details are most of what the technician needs to arrive ready.

Questions people ask

Is ₹350 the whole cost of the repair?
It covers the visit, the diagnosis and standard labour for that fault. If a part is needed — a power board, a capacitor set, a Wi-Fi module, an IR sensor — it is charged at MRP and shown to you before fitting. For faults that turn out to be a setting, a cable or a frozen board, the rate card figure is the whole bill.
Why is the backlight fault priced higher than the others?
Because of the labour. To reach the LED strips the technician has to remove the back cover, the boards and then lift the panel out of its frame, and put it all back without stressing the glass. It takes longer and needs more care than swapping a plug-in board, so the rate card has it at ₹499 rather than ₹350.
What if the technician finds the panel is damaged?
You get a plain answer that it is the panel and, if a replacement exists for the model, a written quote at MRP. Most people decline that quote and buy new, and the bill is the ₹350 visit. Paying for a clear diagnosis before shopping for a new TV is a fair use of the money.

Keep reading