Carpentry guides
Furniture repair · Doors · Wardrobes · 10 guides
Bed frame creaks and joint failure: find it before a slat snaps
A creaking bed is a loose joint, and loose joints break slats and rails. How to trace the noise, tighten it properly, and when the frame needs real rework.
4 min read
Custom shelves: load, span and fixing into brick or concrete
Wall shelves fail at the fixing, not the plank. How much span a shelf can take, the right anchor for brick, block or concrete, and where you must not drill.
4 min read
Hinges, handles and soft-close: the small repairs worth doing early
Loose hinges, wobbling handles and dampers that stopped closing are cheap fixes that prevent expensive damage. What each symptom means and how to adjust it.
4 min read
Modular kitchen shutters that sag, rub or stay open: hinge failure
Kitchen shutters drop because the hinge carries everything in the steamiest room in the house. How to adjust them, and when the board itself has failed.
3 min read
Plywood, MDF or particle board for a humid coastal home?
The three boards behave very differently in Nellore's humidity and salt air. Where water gets in first, what to specify, and what cannot be repaired.
4 min read
Repair or replace? A straight test for tired furniture
When furniture is worth repairing and when it is money into a dead frame. Judge the carcass, the joints and the board before you judge the surface.
4 min read
Termite and borer damage in furniture: what carpentry can save
Termites and powder-post borers destroy furniture from the inside. How to tell them apart, what a carpenter can rebuild, and why treatment has to come first.
4 min read
Wardrobe sliding doors off track: rollers, channels and alignment
Sliding wardrobe shutters jump the track when rollers wear or the channel fills with grit. How to diagnose it, what to clean, and what has to be replaced.
4 min read
What carpentry work costs in Nellore: the rate card explained
Prices for door and window fixes, furniture repair, wardrobe sliding, custom shelves and bed frames — which job to book, and how materials are billed.
4 min read
Why doors stick in Nellore's monsoon — and why not to plane them
Timber swells once the north-east monsoon humidity arrives, so a door that jams in November may fit fine in March. What to adjust instead of planing.
4 min read